Manual

T6050 Hardware & Installation Guide Chapter 4 – Installation
PD-6050 Dec 04
7
Chapter 4 - Installation
Site Selection Considerations
The T6050 requires the following conditions during normal operation:
• 32 to 130ºF (0 to 55ºC)
• 5 to 96% relative humidity
• Protection from direct contact with water, chemicals, and conductive dust
• Limited exposure to sulfur compounds, acid other corrosive or reactive vapors or fumes,
and conductive dust
• Limited exposure to non-conductive dust and combustible dust and lint
Access Considerations
There are very few restrictions on the mounting position of the T6050. The following should be
taken into consideration:
• All input/outputs are connected on the termination type electronic component housing.
Adequate wireway space should be provided.
• Outdoor installation is not recommended, but can be accomplished if the module is
placed in an appropriate enclosure.