User Manual

Historian Package for W INTERPRET (T3832)
PD - 6042 March, 06 31
Using the Process Historian Monitor
When you have selected a Process Historian function block in
the Program Monitor window and choose the Monitor
command from the Control Menu, the Process Historian
Monitor window is opened as shown in Figure 19 .
Figure 19 . Process Historian Monitor Window.
Normally you will use the Process Historian Monitor Window
to retrieve any historical data that have been recorded by the
Process Historian function block in the Regent. The steps
that you must follow to accomplish this are described in Table
2 . Specific details about the commands used to perform these
steps are explained in detailed paragraphs in the following
menu command descriptions.