Owner's manual

Monitored Guarded Output Modules

(T3481/81A, 84 and 88/88A)

6033

Mar

(Issue 2)

Figure

. Defining the Guarded Output Module Definition.

If you do not configure the modules for Dual Mode then the

output testing performed on the modules will not be

coordinated and each of the modules wired in parallel will

report a fault.

For the T3484, 110 VAC Monitored Guarded Output Module

you must also select the line frequency of the field power

supply. In the Line Frequency drop

down list, select either

Hz or 60 Hz.

Edit each point:

Choose Edit from the Module Definition dialog box to define a

name and description for each output point. In the Monitored

Guarded Output Point dialog, enter names and values for the

configuration fields as described below.

Note: