Quick Start Instruction Manual

Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013 55
Add Basic System Diagnostics Chapter 4
8. Type the controller slot number in the MOV instruction.
9. Change the GSV instruction to a CLR instruction that is configured as shown in the illustration.
10. Click the Finalize All Edits in Program icon .
11. Click Yes to finalize all of the edits.
Add Controller Diagnostics to a HMI Project
Follow these steps to add controller diagnostics to your HMI project.
1. Open the project that you created in Chapter 2 in the FactoryTalk View Studio software. See page 29
.
2. Load the required HMI files for the L_CPU Add-On Instruction as documented in the PlantPAx Library of Logix
Diagnostic Objects Reference Manual, publication PROCES-RM003
.
3. From your HMI project, right-click a system diagnostic display (for example, P1f System) from the template and
choose Open.
See page 43
for descriptions of the components in a HMI project.