Quick Start Instruction Manual

Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013 51
Chapter 4
Add Basic System Diagnostics
In this chapter, you learn how to add controller and PASS server diagnostics to your system health screen that is provided in
the HMI template. As you develop your project, you can add additional diagnostics for your system. Add These Additional
Resources are listed at the end of this chapter.
Before You Begin
You must complete these tasks before using this chapter:
• Tasks described in Before Using This Publication on page 6
• Configure your system; see Chapter 1 and Chapter 2 for procedures
• Familiarize yourself with the HMI template; see Chapter 3
for procedures
What You Need
You must have RSLogix 5000 and FactoryTalk View Studio software, the HMI template, and ControlLogix controllers
online to complete the tasks in this chapter.
The sample illustration shows diagnostic displays that are explored in this chapter.