Quick Start Instruction Manual

26 Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013
Chapter 2 Create Your HMI Project
HMI Template Overview
There are three HMI templates available for download on the Knowledgebase Answer ID 62682
at http://www.rockwellautomation.custhelp.com
. For most systems, you load the templates on the PASS server by using
the EWS, and your system data is viewed on the OWS.
PlantPAx HMI templates are provided as local site edition back-up files. All of the above templates include the following
attributes:
• Basic display layout
• Navigation
• FactoryTalk View Alarms and Events displays
Download the PlantPAx Library
If you have not done so already, complete the task on page 13 to download the HMI template files in the PlantPAx Library
of Process Objects.
Load the HMI Template
The downloaded PlantPAx HMI templates are local site edition back-up files. This task restores the HMI back-up file onto
your system and makes the template available for deployment as you create HMI servers for your project.
1. From the Start menu, run the FactoryTalk View tool Application Manager .
Table 5 - HMI Template Names and Display Resolutions
Name Supported Resolution
FTVSE_7_P1FHD_3_0_00.apa 1920 x 1080, Full HD
FTVSE_7_P1SXGA_3_0_00.apa 1280 x 1024, SXGA
FTVSE_7_P1WXGA_3_0_00.apa 1366 x 768, WXGA
TIP
The HMI templates described in Table 5 are distributed with the Library in a folder titled, Templates.