User manual

Publication 1783-UM003D-EN-E - December 2009 93
Chapter 3
Configure Port Mirroring
To enable port mirroring, follow this procedure.
1. From the Device Manager Web interface, choose
Configure>Smartports.
2. Select the port mirroring role.
3. Apply the port that will be used for as the monitoring port.
4. Click Customize to link the port that will be mirrored (source interface
and VLAN) to the monitoring port.
Dashboard Dialog Box
Use the dashboard to monitor switch status and performance. The dashboard
is displayed when you start the Device Manager Web interface.
TIP
Only one port on the switch can be monitored at a time.