User manual

92 Publication 1783-UM003D-EN-E - December 2009
Chapter 3
2. Assign a unique IP address and subnet mask for each VLAN.
3. Select Enable Routing.
Route Across Ports
You can also route information across ports that are on different VLANs
within the Stratix 8300 switch.
To route across ports, use the IP Addresses dialog to enable static routing.
1. Choose Configure > IP Addresses from the Device Manager Web
interface.
2. Select the box for each port to be routed.
3. Assign a unique IP address and subnet mask.
4. Select Enable Routing
Click Enable Routing.