User manual

Publication 1783-UM003D-EN-E - December 2009 57
Chapter 3
Front Panel View and
Status Indicators
The Front Panel view is a graphical display of the front panels of the base
switch and attached switch expansion modules, and it is always visible during
the Device Manager Web interface session.
Click the Front Panel image to expand or collapse it.
The switch components on the front panel view are color-coded by status. The
colors help you to quickly see if a fault or an error condition exists. The
system-level status indicators and port-level status indicators shown on the
front panel view match those on the physical switch.
System-level Status Indicators
Status
Indicator
Explanation
EIP Mod The EIP Mod status indicator shows the status of the switch.
Off Power to the switch is off or is not properly connected.
Solid green The switch is operating properly.
Blinking green The switch is not configured (for example, the switch does not have an IP address
configured).
Blinking red The switch has detected a recoverable system fault. Use the Alert Log to see more
details about the problem (see the Alert Log section on page 102
).
Solid Red The switch has detected a non-recoverable system. Use the Alert Log to see more details
about the problem (see the Alert Log section on page 102
).
Blinking green and red The switch is running its power-on self-test (POST).
EIP Net The EIP Net status indicator shows the network status of the switch.
Off Power to the switch is off or is not properly connected.
Solid green The switch has an established CIP connection to one or more attached devices.
Blinking green The switch has an IP address but the switch does not have an established connection to
one or more attached devices.
Blinking red One or more connections to attached devices have timed out.
Solid Red The switch has detected that its IP address is already in use by another device in the
network.
Blinking green and red The switch is running its power-on self-test (POST).