User manual

22 Publication 1783-UM003D-EN-E - December 2009
Chapter 1
• If you click Cancel, the fields are cleared, and you can start over.
7. Turn off DC power at the source, disconnect all cables to the switch,
and install the switch in your network.
8. After you complete Express Setup, refresh the personal computer IP
address.
• For a dynamically-assigned IP address, disconnect the personal
computer from the switch, and reconnect the personal computer to
the network. The network DHCP server assigns a new IP address to
the personal computer.
• For a statically-assigned IP address, change it to the previously
configured IP address.
Device Manager Web
Interface
You can manage the switch by using the Device Manager Web interface to
configure and monitor the switch. The Device Manager Web interface is a
graphical device management tool for configuring, monitoring, and
troubleshooting individual switches.
The Device Manager Web interface displays real-time views of switch
configuration and performance. It simplifies configuration tasks with features
such as Smartports to quickly set up the switch and its ports. It uses graphical,
color-coded displays, such as the Front Panel view, graphs, and animated
indicators to simplify monitoring tasks. It provides alert tools to help you to
identify and to solve networking problems.
You can display the Device Manager Web interface from anywhere in your
network through a Web browser such as Microsoft Internet Explorer.