User manual

148 Publication 1783-UM003D-EN-E - December 2009
Chapter 5
Restart the Switch from the Device Manager Web Interface
From the Device Manager Web interface, on the Restart/Reset dialog box,
click Restart the Switch.
This option restarts the switch without turning off power. The Device
Manager Web interface is unavailable during the restart process. When the
process completes, the switch displays the Device Manager Web interface.
If you do not know the switch IP address, follow the procedure in the Access
Direct Managed Mode section on page 146 to access Direct Managed mode.
Restart the Switch from RSLogix 5000 Programming Software
Using RSLogix 5000 software, do the following.
1. Click the Module Info tab.
2. Click Reset Module.
A password prompt appears.
3. Enter your password and click Enter.
Reset the Switch to Factory Defaults
From the Device Manager Web interface, do the following.
1. Access the Device Manager Web interface Restart/Reset dialog box.
2. Click Reset the Switch.
ATTENTION
Resetting the switch deletes all customized switch settings,
including the IP address, and returns the switch to its factory
default. The same software image is retained. To manage the
switch or to display the device manager, you need to
reconfigure the basic switch settings (as described in Chapter
3, Manage the Switch via the Device Manager Web Interface )
and use the new IP address.
IMPORTANT
Restarting the switch interrupts connectivity of your devices to
the network.