User manual

136 Publication 1783-UM003D-EN-E - December 2009
Chapter 4
Port Fault Status • Error-disable event
• SFP error-disabled
• CDP native VLAN mismatch
• MAC address flap
• Port security violation
• No fault
Displays the current status of the port fault.
Threshold Exceeded • Unicast
Displays a yes or no value indicating whether the
current unicast traffic has exceeded the threshold
value.
• Multicast
Displays a yes or no value indicating whether the
current multicast traffic has exceeded the threshold
value.
• Broadcast
Displays a yes or no value indicating whether the
current broadcast traffic has exceeded the threshold
value.
If the threshold value (set in Advanced->Port
Threshold tab) has been exceeded, a yes value
displays in the appropriate column. If the threshold
value has not been exceeded, a no value displays in
the appropriate column.
Bandwidth Utilization N/A Displays the percentage of the bandwidth being
used. Note whether the percentage of usage is
what you expect during the given time of network
activity. If usage is higher than you expected, a
problem might exist.
Port Diagnostics N/A Click to display the Port Diagnostic dialog box for
the corresponding port. The Port Diagnostic screen
provides you information to diagnose a network
performance problem.
In this field Values are Comments