User manual

Publication 1783-UM003D-EN-E - December 2009 133
Chapter 4
Switch Status
Through RSLogix 5000 software, you can monitor switch status. Use this tab
to monitor the switch and port conditions to quickly see if a fault or error
condition exists. This tab also shows the overall health of the switch
(temperature and power).
In this field Values are Comments
Alarms Active Alarms
Major Alarm Relay Configured State
Major Alarm Relay
Minor Alarm Relay Configured State
Minor Alarm Relay
Displays the active switch and port alarms. The
available values are:
None.
Port alarm.
Dual Mode Power Supply alarm.
Primary Temperature alarm.
Displays whether the major alarm relay is
configured.
Displays whether the major alarm relay is on or off.
Displays whether the minor alarm relay is
configured.
Displays whether the minor alarm relay is on or off.
Active Faults Displays the active switch and port faults. The
available values are:
None.
Port fault.
Hardware fault.
If the port and hardware faults are active, the
Hardware fault will be displayed.