User manual

Publication 1783-UM003D-EN-E - December 2009 119
Chapter 4
Connection Properties
In this field Values are Comments
Requested Packet
Interval (RPI)
Inhibit Module
Major Fault on
Controller If Connection
Fails While in Run Mode
Use Unicast
Connections over
EtherNet/IP
Module Fault
300…5000
Check to disable communication between the controller
and the switch. Uncheck to restore communication.
Check to have the controller create a major fault if
connection fails in Run mode.
Check to use Unicast connections with the EtherNet/IP
network.
Displays the fault code returned from the controller
(related to the switch you are configuring), and the
text detailing the module fault has occurred.