User manual

Publication 1783-UM003D-EN-E - December 2009 113
Chapter 4
– Multicast Groups Active: quantity
• Output Data via I/O Connection
– Port Disable per port: enabled, disabled
• Other Status Data
– Switch Internal Temperature: degrees Centigrade
– Power Supply A present: yes, no
– Power Supply B present: yes, no
– Identity Info: VendorID, DeviceType, ProductCode, ProductName,
Revision, SerialNumber
– IOS Release version
– Switch Uptime (since last reboot)
– Management CPU Utilization: in %
– CIP Connection Counters: open/close requests, open/close rejects,
timeouts
– Port Alarm Status per port: OK, not forwarding, not operating,
excessive FCS errors
– Port Fault Status per port: Error Disable, SFP error, native VLAN
mismatch, MAC address flap condition, security violation
– Port Diagnostic Counters per port: Ethernet Interface counters (10),
Ethernet Media counters (12)
• Configuration Data (requires password)
– IP Address Method: DHCP, static
– IP Address, Subnet Mask, Default Gateway (all if static)
– Host Name
– Contact name
– Geographic Location
– Port Config per port: enable/disable, autonegotiate, forced
speed/duplex
– Authorized MACID per port
– Unicast Storm Control Threshold per port: in packets per second,
bits per sec, or %
– Multicast Storm Control Threshold: in packets per second, bits per
sec, or %
– Broadcast Storm Control Threshold: in packets per second, bits per
sec, or %
• Smart Port assignment per port: Role and VLAN
• Save and Restore of Switch Configuration (via File Obj)