User manual

Publication 1783-UM003D-EN-E - December 2009 103
Chapter 3
To display the Alert Log, choose Monitor>Alert Log from the Device
Manager Web interface menu.
Click Clear Log to acknowledge that you have read the alerts. Clicking Clear
Log does not resolve the issue.
Use the Diagnostic Test dialog box to generate a diagnostics report to resolve
the issues detected by the switch.
The Alert Log includes this information.
Issue Description
Severity Level A single-digit code (0…5) that reflects the severity of the problem. The lower the number, the more serious the
condition and the need to take action.
Emergency (0)—The switch is unusable.
Alert (1)—The switch requires immediate action.
Critical (2)—The switch has a critical condition.
Error (3)—The switch has an error condition.
Warning (4)—The switch has a warning condition.
Notifications (5)—The switch is operating normally but has a significant condition.
Description The description of the problem, including the port on which the problem was detected.
Time Stamp The date and time of the refresh cycle during which the problem was last detected.