User manual

Rockwell Automation Publication 1783-UM003I-EN-P - March 2014 15
Chapter 1
Install the Switch
Topic Page
Before You Begin 17
Install the Switch 21
Attach Expansion Modules (optional) 22
Mount the Switch on a DIN Rail 24
Mount the Switch on a Wall or Panel 26
Install an SFP Module (optional) 27
Ground the Switch 28
Wire the DC Power Source for the Switch 29
Wire the DC Power Source for the PoE Expansion Module (optional) 31
Attach the Power and Relay Connector to the Switch to the Switch 33
Attach the Power Connector to the PoE Expansion Module (optional) 35
Wire External Alarms (optional) 35
Connect to 10/100 Copper Ports 37
Connect to a PoE Expansion Module Port 37
Connect to Dual-purpose Uplink Ports 38
Connect to 100BaseFX Ports 39
Install or Remove the CompactFlash Card 39
Reset the Switch to Factory Defaults 40
Troubleshoot the Installation 40