User manual

100 Rockwell Automation Publication 1783-UM003I-EN-P - March 2014
Chapter 4 Manage the Switch via the Device Manager Web Interface
Configure Port Thresholds
Configure port thresholds to prevent traffic on a LAN from being disrupted by a
broadcast, multicast, or unicast storm on one of the physical interfaces.
To configure port thresholds, from the Configure menu, choose Port Thresholds.
Table 8 - Port Threshold Fields
Field Description
Incoming
Unicast For each port, do the following.
1. Check or clear the Enable checkbox.
2. Type the threshold value.
3. Choose one of these units:
– PPS (O…10 billion)
– BPS (O…10 billion)
– % (0…100)
Multicast
Broadcast
Outgoing
All Traffic For each port, do the following.
1. Check or clear the Enable checkbox.
2. Type the threshold value.
3. Click Save.