User Manual Version 3.0 Instruction Manual

Parameter Descriptions 11-53
Displays the present parameter access level. Refer to chapter 10 for
more information about parameter access levels.
Resets all parameter values to defaults. Option 1 resets the drive to
factory settings. Options 2 and 3 resets the drive to alternate
voltage and current rating.
Important: On frame 5 and 6 drives, the internal fan voltage may
have to be changed when using options 2 or 3. See
section 3.1.1.4.
Loads a previously saved set of parameter values from a selected
user set location in drive non-volatile memory to active drive
memory.
An F-Key on the LCD OIM can be configured for this function. Refer
to Appendix B.
196 Param Access Lvl
Range: 0 = Basic
1 = Standard
2 = Advanced
Default: Read Only
Access: 0 Path: Utility>Drive Memory
See also:
197 Reset To Defalts
Range: 0 = Ready
1 = Factory
2 = Low Voltage
3 = High Voltage
Default: 0 = Ready
Access: 0 Path: Utility>Drive Memory
See also:
198 Load Frm Usr Set
Range: 0 = Ready
1 = User Set 1
2 = User Set 2
3 = User Set 3
Default: 0 = Ready
Access: 1 Path: Utility>Drive Memory
See also: 199