User Manual Version 1.0 Owner manual

2-22 SP600 AC Drive User Manual
Figure 2.5 shows the locations of the drive terminal blocks and
connectors used to set up and operate the drive on NEMA 4 drives.
The NEMA 4 drive has a different location for the DPI serial
connector ( ) than on the NEMA 1 drive.
No. Connector Description
DPI Port 2 Cable connection for remote OIM or
VS Utilities .
DPI Port 3 Cable connection for remote OIM or
VS Utilities.
DPI Port 5 Connection for an optional communications
module.
Signal and I/O
Terminal Block
Connections for signal and I/O wiring.

Power Terminal
Block
Connections for input and output power
wiring.
Figure 2.5 – Drive Connections (NEMA 4 Drives)
2
1or3







Optional
Splitter Cable
(RECBL-SSP)

