User Manual Version 1.0 Owner manual

Record of User Settings E-3
122 Slip Comp Gain Speed Command>Slip Comp
123 Slip RPM Meter Speed Command>Slip Comp
124 PI Configuration Speed Command>Process PI
125 PI Control Speed Command>Process PI
126 PI Reference Sel Speed Command>Process PI
127 PI Setpoint Speed Command>Process PI
128 PI Feedback Sel Speed Command>Process PI
129 PI Integral Time Speed Command>Process PI
130 PI Prop Gain Speed Command>Process PI
131 PI Lower Limit Speed Command>Process PI
132 PI Upper Limit Speed Command>Process PI
133 PI Preload Speed Command>Process PI
140 Accel Time 1 Dynamic Control>Ramp Rates
141 Accel Time 2 Dynamic Control>Ramp Rates
142 Decel Time 1 Dynamic Control>Ramp Rates
143 Decel Time 2 Dynamic Control>Ramp Rates
146 S Curve % Dynamic Control>Ramp Rates
147 Current Lmt Sel Dynamic Control>Ramp Rates
148 Current Lmt Val Dynamic Control>Load Limits
149 Current Lmt Gain Dynamic Control>Load Limits
150 Drive OL Mode Dynamic Control>Load Limits
151 CarrierFrequency Dynamic Control>Load Limits
155 Stop Mode A Dynamic Control>Stop/Brake
Modes
156 Stop Mode B Dynamic Control>Stop/Brake
Modes
157 DC Brake Lvl Sel Dynamic Control>Stop/Brake
Modes
158 DC Brake Level Dynamic Control>Stop/Brake
Modes
159 DC Brake Time Dynamic Control>Stop/Brake
Modes
160 Bus Reg Gain Dynamic Control>Stop/Brake
Modes
161 Bus Reg Mode A Dynamic Control>Stop/Brake
Modes
162 Bus Reg Mode B Dynamic Control>Stop/Brake
Modes
No. Parameter Name Path (File>Group) Setting