User Manual Version 1.0 Owner manual

B-4 SP600 AC Drive User Manual
Fault Amps 225 Utility>Diagnostics 12-67
Fault Bus Volts 226 Utility>Diagnostics 12-67
Fault Clear 240 Utility>Faults 12-71
Fault Clear Mode 241 Utility>Faults 12-71
Fault Config 1 238 Utility>Faults 12-71
Fault Frequency 224 Utility>Diagnostics 12-67
Flux Current 5 Monitor>Metering 12-5
Flux Current Ref 63 Motor Control>Torq Attributes 12-16
Flux Up Mode 57 Motor Control>Torq Attributes 12-14
Flux Up Time 58 Motor Control>Torq Attributes 12-15
Flying Start En 169 Dynamic Control>Stop/Restart Modes 12-49
Flying StartGain 170 Dynamic Control>Stop/Restart Modes 12-49
IR Voltage Drop 62 Motor Control>Torq Attributes 12-16
Jog Speed 100 Speed Command>Discrete Speeds 12-26
Language 201 Utility>Drive Memory 12-58
Last Stop Source 215 Utility>Diagnostics 12-65
LevelSense Start 168 Dynamic Control>Stop/Restart Modes 12-48
Load Frm Usr Set 198 Utility>Drive Memory 12-57
Logic Source Sel 89 Speed Command>Control Src Select 12-21
Man Ref Preload 193 Utility>OIM Ref Config 12-54
Manual Mask 286 Communication>Masks & Owners 12-74
Manual Owner 298 Communication>Masks & Owners 12-75
Maximum Freq 55 Motor Control>Torq Attributes 12-13
Maximum Speed 82 Speed Command>Spd Mode & Limits 12-19
Maximum Voltage 54 Motor Control>Torq Attributes 12-13
Minimum Speed 81 Speed Command>Spd Mode & Limits 12-13
MOP Frequency 11 Monitor>Metering 12-7
MOP Rate 195 Utility>MOP Config 12-55
Motor NP FLA 42 Motor Control>Motor Data 12-9
Motor NP Hertz 43 Motor Control>Motor Data 12-10
Motor NP Power 45 Motor Control>Motor Data 12-10
Motor NP RPM 44 Motor Control>Motor Data 12-10
Motor NP Volts 41 Motor Control>Motor Data 12-9
Motor OL Count 220 Utility>Diagnostics 12-65
Motor OL Factor 48 Motor Control>Motor Data 12-11
Motor OL Hertz 47 Motor Control>Motor Data 12-11
Parameter Name No. Path (File>Group)
Page
No.