User Manual Version 1.0 Owner manual

12-80

SP600 AC Drive User Manual

Enables/disables the square root function for each analog input.

This function is typically used when measuring the feedback for the

process control regulator. The square root function is scaled such

that the input range is the same as the output range. For example, if

the input is set up as a unipolar voltage input, then the input and

output ranges of the square root function will be 0 to 10 volts.

321 Anlg In Sqr Root

Range: See figure 12.50

Default: See figure 12.50

Access: 2 Path: Inputs & Outputs>Analog Inputs