User Manual Version 1.0 Owner manual

Parameter Descriptions

12-77

Parameter number whose value will be written from a

communications device data table. Refer to figure 12.47.

Parameters that can be changed only while the drive is stopped

cannot be used as Datalink inputs. Entering a parameter of this type

will disable the link.

Refer to the appropriate communications module manual for more

information about Datalinks.

Parameter number whose value will be written from a

communications device data table. Refer to figure 12.47.

Parameters that can be changed only while the drive is stopped

cannot be used as Datalink inputs. Entering a parameter of this type

will disable the link.

Refer to the appropriate communications module manual for more

information about Datalinks.

304

305

Data In C1 - Link C Word 1

Data In C2 - Link C Word 2

Range: 0 to 387 [1]

Default: 0 (Disabled)

Access: 2 Path: Communication>Datalinks