User Manual Version 1.0 Owner manual

12-74

SP600 AC Drive User Manual

Displays the present frequency reference scaled as a DPI reference

for peer-to-peer communications. The value shown is the value after

the accel/decel ramp but prior to any corrections supplied by slip

comp, PI, etc.

Disables manual requests at the port corresponding to bit number.

Example of manual mode selection source:

If:

• Bit 0 = 0 (Terminal block disabled)

• Bit 1 = 1 (Local OIM enabled)

Then manual mode selection can be activated from the OIM but not

the I/O terminals.

273 Drive Ramp Rslt

Range: 0 to 32767 [1]

Default: Read Only

Access: 2 Path: Communication>Comm Control