User Manual Version 1.0 Owner manual

Parameter Descriptions 12-65
Displays the source that initiated the most recent stop command. It
will be cleared (set to 0) during the next start sequence.
Displays the current state of the digital inputs on the terminal block.
215 Last Stop Source
Range: 0 = Pwr Removed
1 = Local OIM
2 = DPI Port 2
3 = DPI Port 3
4 = Reserved
5 = Network
6 = Reserved
7 = Digital In
8 = Fault
9 = Not Enabled
10 = Sleep
11 = Jog
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also:
216 Dig In Status
Range: See figure12.35
Default: Read Only
Access: 2 Path: Utility>Diagnostics
Inputs & Outputs>Digital Inputs
See also: 361-366
Figure 12.35 – Dig In Status (216)
000000xxxxxxxxxx
10 01234567891112131415
1 = Input Present
0 = Input Not Present
x =Reserved
Bit #
Digital In1
Digital In2
Digital In3
Digital In4
Digital In5
Digital In6
Nibble 1Nibble 2Nibble 3Nibble 4
Function Terminal #
Digital In1 1
Digital In2 2
Digital In3 3
Digital In4 4
Digital In5 5
Digital In6 6