Quick Start Guide Manual

Drive Parameters

P-37Avoidance Frequency 0.0 Hz 0 - 240.0 x x x

P-38 Avoidance Frequency Band 0.0 Hz 0 - 30.0 x x x

Group 4: Fixed Speeds

P-40 Internal / Jog Frequency 60.0 Hz 0 - 240.0 x x x

P-41Preset Speed 1 2.5 Hz 0 - 240.0 x

P-42 Preset Speed 2 5.0 Hz 0 - 240.0 x

P-43Preset Speed 3 10.0 Hz 0 - 240.0 x

P-44 Preset Speed 4 20.0 Hz 0 - 240.0 x

P-45Preset Speed 5 30.0 Hz 0 - 240.0 x

P-46 Preset Speed 6 40.0 Hz 0 - 240.0 x

P-47Preset Speed 7 50.0 Hz 0 - 240.0 x

P-48 Preset Speed 8 60.0 Hz 0 - 240.0 x

Group 5: V / Hz

P-50 Base Voltage 230 V /

460 V

0 - 230 or 0 - 460 x x x

P-51Base Frequency 60 Hz 0 - 240 x x x

P-52 Breakpoint Voltage 0 V 0 - 230 or 0 - 460 x x x

P-53Breakpoint Frequency 0 Hz 0 - 240 x x x

P-54 Boost Voltage 11 / 23 V 0 - 46 or 0 - 92 x x x

P-55Auto Torque Boost 3.0 % 0 - 10 x x x

Group 6: Utility

P-60 Reset to Defaults * 0 0 - 1; entering 1 performs a reset x x x

P-61Program Password OFF OFF / ON ; entering 257 toggles

the setting

x x x

P-62 Units at Base Frequency 0 0 - 9999; scales d-00 and d-01

displays

xxx

P-63Units at Analog Max 0 0 - 9999; scales d-08 and d-09

displays

x x

P-64 Carrier Frequency 2 kHz 2 - 8 x x x

Program Parameters

(Parameters that can be programmed only while the drive

is stopped are indicated by an asterisk *)

Units / Model

No. Name Default Range A B C