Manual

Editing Drive Parameters 7-17
7.1.6 Volts/Hertz Curve Parameters (Group 5)
Following is a volts/hertz curve diagram and the volts/hertz parameter descriptions.
P-47 Preset Speed 7 Model
A B C
Use this parameter to define the
commanded drive frequency when it
is selected by the control inputs and
the drive is operating in the preset
mode.
Parameter Range: 0 to 240.0 (x.x Hz) X
Default Setting: 50.0 X
Running Access: RW
P-48 Preset Speed 8 Model
A B C
Use this parameter to define the
commanded drive frequency when it
is selected by the control inputs and
the drive is operating in the preset
mode.
Parameter Range: 0 to 240.0 (x.x Hz) X
Default Setting: 60.0 X
Running Access: RW
Breakpoint Frequency
(P53)
Base Frequency
(P-51)
Maximum Speed
P-01)
Base Voltage
(P-50)
Breakpoint
Voltage
(P-52)
Boost Voltage
(P-54)
0
0
Volts Per Hertz Curve
P-50 Base Voltage Model
A B C
Use this parameter to set the motor
rated nameplate voltage.
Parameter Range: 0 to rated drive voltage (V) X X X
Default Setting: 230 or 460 X X X
Running Access: RW