Instruction Manual

Parameters and Programming

3-5

English

Restoring Factory Defaults

This example shows you how to reset the factory defaults of the drive.

Action Description Display

Press Down Arrow to advance to the b parameter

group.

b--

Press PROGram to enter into the b parameter

group.

b01

Press Up Arrow to scroll through the parameters

until b84 [

RESET FUNCTIONS] is displayed.

b84

Press PROGram to view the parameter value stored

in b84 - [

RESET FUNCTIONS] and verify that it is set to

01. If it is not 01, use Up Arrow to change the value

to 01, then press Enter.

Note: The defaults will be reset to the values

determined by b85 [

FACTORY DEFAULT SELECt].

Press PROGram to return to the parameter number

without changing the stored value.

b84

Press and hold PROGram, Up Arrow, Down Arrow,

and Stop for 3 seconds.

b84

Release the Stop Key and continue to hold the

PROGram, Up Arrow, and Down Arrow until the

display begins to blink. Release the remaining keys.

When this is done, 0.0 will be displayed (this is d01

[

OUTPUT FREQUENCY].

0.0

PROG