Instruction Manual

Programming Basics

3-1

HAPTER

Programming Basics

To program the drive for a specific application, you display

the appropriate parameter and adjust it as required. The

parameters are used to define characteristics of the drive.

3.1 Parameter Menu Structure

The SP200 drive has two kinds of parameters: program

parameters (P-xx), which configure the drive operation, and

display parameters (d-xx), which display information

regarding the drive status.

3.2 Parameter Types

There are three types of parameters:

•

Tunable

parameters can be adjusted or changed while the

drive is running or stopped.

•

Configurable

parameters can be adjusted or changed

only while the drive is stopped.

•

Read-only

parameters cannot be adjusted.

Table 3.1 – Parameter Organization

Range Parameter Group Parameter Type

P-00 to P-05

P-10 to P-13

P-20 to P-29

P-30 to P-38

P-40 to P-48

P-50 to P-55

P-60 to P-64

Protection

Digital Input/Output

Speed Reference

Dynamic Control

Fixed Speeds

V/Hz Curve

Utility

Program Parameters

d-00 to d-09 Display Parameters Display Parameters