Specifications

Publication 1747-SG001E-EN-E - February 2013
96 Select Programming Software
In most cases, RSLinx Lite software comes bundled with controller programming
software packages.
You can also download RSLinx Lite for free from the Software Updates link on the Get
Support Now website at http://suport.rockwellautomation.com
.
Select the RSLinx Software
Package
RSNetWorx Software
RSNetWorx software is the configuration tool for your control network. With
RSNetWorx software you can create a graphical representation of your network
configuration and configure the parameters that define your network.
Use RSNetWorx software for:
• ControlNet software to schedule network components. The software
automatically calculates network bandwidth for the entire network, as well as the
bandwidth used by each network component. You must have RSNetWorx
software to configure and schedule ControlNet networks.
• DeviceNet software to configure DeviceNet I/O devices and create a scan list.
The DeviceNet scanner stores the configuration information and scan list.
• EtherNet/IP software to configure EtherNet/IP devices using IP addresses or host
names.
Catalog Number RSLinx Products
Available only bundled with
other products such as
RSLogix software products.
Pentium100 MHz processor
(faster processors will improve performance)
9355-WABSNENE Supported operating systems:
• Microsoft Windows XP
• Microsoft Windows 2000
• Microsoft Windows NT version 4.0 with Service Pack 3 or
greater
• Microsoft Windows ME
• Microsoft Windows 98
9355-WABOEMENE 32 MB of RAM min
64 MB or more of RAM recommended
9355-WABENE 35 MB of free hard disk space
(or more based on application requirements)
9355-WABGWENE RSLinx Gateway
9355-WABCENE RSLinx SDK
9355-RSLETENE RSLinx Enterprise