Specifications

Publication 1747-SG001E-EN-E - February 2013
Select Network Communications 67
1761-CBLAS09 RJ45 to 6-Pin Phoenix Connector Communication Cable - This 9.5 m (31.2
ft) cable is used to connect the SLC 5/01, SLC 5/02, and SLC 5/03
processor RJ45 port to port 3 of the 1761-NET-AIC.
1747-CP3 SLC 5/03, 5/04, and 5/05 RS-232 Programmer Cable - This 3 m (10 ft)
cable has two 9-pin DTE connectors and is used to connect the SLC
processor RS-232 channel (channel 0) to a personal computer serial port.
1747-C11 Processor to Isolated Link Coupler Replacement Cable – This 304.8 mm
(12 in) cable is used to connect the SLC 500 processor to the Isolated Link
Coupler (1747-AIC).
1747-C13 Specialty Module to Isolated Link Coupler Cable - Use a 1747-C13 cable
to connect a BASIC or KE module to an Isolated Link Coupler (1747-AIC).
Also connects 1747-UIC RS-485 port to AIC or SLC RJ45 port.
Communication Cables
Catalog Number Description
Cable Connectivity Summary
For Connectivity Between These Devices Preferred Cable
Catalog Number
These Cables May
Be Used
1746-A4, -A7, -A10, or -A13 Chassis 1746-A4, -A7, -A10, or -A13 Chassis 1746-C7
1746-C9
1746-C16
–
1747-DTAM-E Data Table Access Module SLC 500 Processors (DH-485 Channel) 1747-C10 1747-C11
1747-C20
1746-AIC Isolated Link Coupler SLC 500 Processors (DH-485 Channel) 1747-C11 1747-C10
1747-C13
1747-C20
1747-UIC USB to DH-485 Interface Converter
1747-KE DH-485/RS-232C Interface Module
1746-BAS BASIC Module
1747-AIC Isolated Link Coupler (J2 Port)
SLC 500 Processors (DH-485 Channel)
1747-C13 1747-C10
1747-C11
1746-xx32 32-channel I/O Modules 1492-IFM40x 1492-CABLExH –
SLC 5/03 Processor (RS-232 Channel 0)
SLC 5/04 Processor (RS-232 Channel 0)
SLC 5/05 Processor (RS-232 Channel 0)
Personal Computer Serial Port (9-Pin DTE) 1747-CP3 –
1746-I/O 1492-IFMxx Interface Modules 1492-CABLExx –
1747-SN Remote I/O Scanner
1747-DCM Direct Communication Module
1747-ASB SLC Remote I/O Adapter Module
Remote I/O Network Belden 9463 –
SLC 5/04 Processors (1747-L541, -542, -543) Data Highway Plus Belden 9463 –
1747-AIC Isolated Link Coupler
1761-NET-AIC Communication Interface
1784-PKTX(D) Communication Interface Card
1747-AIC Isolated Link Coupler Belden 9842
Belden 3106A
–
1747-DPS1 and 1747-DPS2 Port Splitter Rockwell Automation controllers, PanelView,
PanelView Plus, VersaView, InView and
Personal Computers
Uses available
1747, 1756, 1761,
2706 and 2711
cables.
Refer to Installation
Instructions for the
port splitter
(1747-IN516
).