Specifications

1–2 Quick Start for Experienced Users
Publication 1747-6.2
1. Check the contents of shipping box.
Reference
Unpack the shipping boxes making sure that the contents include:
• SLC 500 Modular Processor
• installation instructions (Publication 1747-5.25 or 1747-5.27)
• SLC 500 Modular Chassis (Catalog Numbers 1746-A4, 1746-A7, 1746-A10, or 1746-A13)
• installation instructions (Publication 1746-5.8)
• SLC 500 Modular Power Supplies (Catalog Numbers 1746-P1, 1746-P2, 1746-P3, 1746-P4, or
1746-P5)
• installation instructions (Publication Number 1746-5.1)
If the contents are incomplete, call your local Allen-Bradley representative for assistance.
–
2. Install the power supply
Reference
Follow the steps below:
1. Align the circuit board of the power supply with the card guides on the left side of the chassis, and
slide the power supply in until it is flush with the chassis.
Chapter 6
(Installing Your
Hardware
Components)
2. Fasten the power supply to the chassis.
Use these screws to fasten the
power supply to the chassis.
Procedures