Specifications

8–4 Starting Up Your Control System
Publication 1747-6.2
4. Name the program. (Becomes the processor name when
downloaded.)
5. Program a sample test rung not affecting machine operation.
6. Save the program and controller configuration.
7. Transfer the controller configuration and sample test program to
the processor. After the new program is transferred to the
processor, the CPU FAULT LED should clear. The CPU FAULT
(or “FLT” on the SLC 5/03, SLC 5/04, and SLC 5/05) LED stops
if it was flashing.
8. Enter the Run mode.
The processor RUN status LED should turn on indicating the
controller is in the Run mode with no CPU faults. If any other
CPU status exists, refer to chapter 9 for recommended action.
9. Monitor and exercise simple test rung.
If a simple test rung operates successfully without CPU faults,
you may assume basic processor functions are properly
functioning. If any other processor status exists, refer to
chapter 10 for recommended action.