Designer Instruction Manual

Publication LOGIX-UM004A-EN-P - March 2007
138 RSLogix 5000 Add-On Instruction
8. Enter parameters (operands) for the AOI.
Monitoring and Updating a
Project Online
This section provides instructions on how to:
• establish online communication with a Logix controller to
monitor and tune (modify parameters) the fuzzy AOI
• what to do if online communication is not working correctly.
The communication with the Logix controller is via a RSLinx
Classic OPC Server.
Before establishing online communication, certain conditions must be
met.
• The fuzzy AOI is generated by FuzzyDesigner.
• The fuzzy AOI is imported to an RSLogix 5000 project.
• An instance of the fuzzy AOI is created in the RSLogix 5000
project.
• The RSLogix 5000 project is downloaded to a Logix controller.
• The order of parameters correspond to
the port order of the fuzzy project
– you can optionally set it from Tools >
Set Port Order menu item in
FuzzyDesigner
• The order of parameters correspond to
the port order of the fuzzy project
– you can optionally set it by the
Tools > Set Port Order menu item
in FuzzyDesigner