Owner's manual

8-4 PROFIBUS Communications Module
8.1.3 NET A Status Indicator
Table 8.3 – NET A Status Indicator: State Definitions
Status Cause Corrective Actions
Off The module is not
powered or is not
connected properly
to the network.
• Securely connect the module to
the drive using the Internal
Interface cable and to the
network using a PROFIBUS
cable.
• Correctly connect the
PROFIBUS cable to the
PROFIBUS connector.
• Apply power to the drive.
Flashing
Red
Error in PROFIBUS
configuration.
• Re-configure the PROFIBUS
module.
Solid
Red
Error in PROFIBUS
controller
initialization.
• Cycle power to the drive.
• Re-configure the PROFIBUS
scanner.
Solid
Green
The module is
properly connected
and communicating
on the network.
• No action required.