Owner's manual

5-8 PROFIBUS Communications Module
Logic Command / Status, Reference / Feedback, Datalinks and
Parameter Access (explicit messaging) modules are added using
the Modules tab.
Step 10. Click on the Modules tab. Click A
dd to view the choice of
modules.
In our example, Station 1 will be controlled using Logic
Command / Status and Reference / Feedback. The
SP600 drive uses 16-bit Reference / Feedback (2 bytes).
Step 11. Select “Ctrl/Stat & Ref/Fdbk (2+2bytes)” from the
“Available Modules” list as shown in figure 5.13. Click OK.
Figure 5.12 – RECOMM-PBUS Modules Tab
Figure 5.13 – Available Modules: Ctrl/Stat & Ref/Fdbk (2x2Bytes) Window
Reliance Electric RECOMM-PBUS