User guide

Interbus Module Parameters
B-7
Configured Process Input Data Description for Word 0. PCP Object
to use for Word 0 transmitted to Interbus master.
Actual Process Input Data Description for Word 0.
Configured Process Input Data Description for Word 1, PCP Object
to use for Word 1 transmitted to Interbus master.
Actual Process Input Data Description for Word 1.
20 PIDD W0 Cfg
Range:
See table B.1
Default:
0x2F9A (Logic Status)
Type:
Read/Write
Reset Required:
No (becomes active when Interbus network is
restarted)
21 PIDD W0 Actual
Range:
See table B.1
Default:
N/A
Type:
Read Only
Reset Required:
N/A
22 PIDD W1 Cfg
Range:
See table B.1
Default:
0x2F9B (Feedback)
Type:
Read/Write
Reset Required:
No (becomes active when Interbus network is
restarted)
23 PIDD W1 Actual
Range:
See table B.1
Default:
N/A
Type:
Read Only
Reset Required:
N/A