User guide

B-4

Interbus Communications Module

I/O that is transferred through the module.

7 Reserved

Range:

N/A

Default:

N/A

Type:

N/A

Reset Required:

N/A

8 DPI I/O Config

Range:

See figure B.1.

Default:

See figure B.1.

Type:

Read/Write

Reset Required:

N/A

Figure B.1 – DPI I/O Config (8)

ATTENTION:

If the module is transmitting I/O that

controls the drive, the drive may fault when you reset

the module. Determine how your drive will respond

before resetting a connected module. Failure to

observe this precaution could result in bodily injury

or damage to equipment.

00010xxx

01234567

1= I/O Enabled

0= I/O Disabled

x =Not Used

Cmd/Ref

Datalink A

Datalink B

Datalink C

Datalink D

Not Used