Owner's manual

7-4 EtherNet/IP Communications Module
Note: The scanner module may be integrated with the controller (for
example, ControlLogix).
➊
➍
➎
Retrieve Explicit
Message Response
Complete Explicit
Message
Set up and send
Explicit Message
➋
➌
➊
Format the required data and set up the ladder
logic program to send an Explicit Message
request to the scanner or bridge module
(download).
➋
The scanner or bridge module transmits the
Explicit Message Request to the slave device
over the EtherNet/IP network.
➌
The slave device transmits the Explicit Message
Response back to the master.
➍
The controller retrieves the Explicit Message
Response. It may be required to repeat steps 1-
3, depending on the amount of data.
➎
The Explicit Message is complete.
Figure 7.2 – Explicit Message Process