Owner manual

7-10
ControlNet Communications Module
Step 12. This window (figure 7.13) is for informational purposes
only. Click
Finish>>
.
Step 13. The configured node (“SP600_02” in this example) now
appears under the 1756-CNB module in the I/O
Configuration folder.
Step 14. Repeat the previous steps for each additional node you
need to configure.
Figure 7.13 – Module Properties: My ControlNet
Figure 7.14 – RSLogix: Configure Additional Nodes Screen
RSLogix 5000 - Example_RECOMM-CNET [1756-L1]
SP600_02
Controller Example_RECOMM-CNET