Owner manual

7-4
ControlNet Communications Module
Step 3. Enter a
Nam
e
,
Slot
number, and
Revision
number
(figure 7.4). Click
Next>
.
Step 4. This step is used to define controller-to-module behavior
(figure 7.5).
I
nhibit Module
inhibits/un-inhibits the
connection to the module. The
M
ajor Fault
check-box
selects if a failure on the connection of this module
causes a major fault on the controller if the connection for
the module fails. Click
Next
>.
Figure 7.4 – Module Properties: Name Selection
Figure 7.5 – Module Properties: Controller-to-Module Behavior Screen