Owner manual

Contents

List of Tables

Table 2.1 – Equipment Shipped with the ControlNet Module ................... 2-2

Table 2.2 – Required User-Supplied Equipment ...................................... 2-2

Table 4.1 – Configuration Tools................................................................ 4-1

Table 4.2 – Selections for Drive Response to Communication Fault........ 4-6

Table 4.3 – Fault Configuration Parameters............................................. 4-7

Table 4.4 – Module Configuration Status Parameters.............................. 4-8

Table 5.1 – Input/Output Table............................................................... 5-14

Table 6.1 – Parameter Settings for the Sample Program......................... 6-7

Table 7.1 – Parameter Settings for the Sample Program....................... 7-16

Table 8.1 – DRIVE Status Indicator: State Definitions.............................. 8-2

Table 8.2 – MS Status Indicator: State Definitions ................................... 8-3

Table 8.3 – NET A and B Together: State Definitions .............................. 8-4

Table 8.4 – NET A and B Independently: State Definitions ...................... 8-5

Table 8.5 – Module Diagnostic Items........................................................ 8-6

Table 8.6 – Event Codes and Descriptions............................................... 8-8