Owner manual

PLC-5C Applications
6-17
Get Attribute Single example response (reading SP600 Parameter 1
in figure 6.11):
Response Data
A Set_Attribute_Single message is used to write a single parameter
(figure 6.12).
•
A Service Code of “10” indicates the Set_Attribute_Single service
(see page C-20, Common Services).
•
An Instance Number of “41” indicates Drive Parameter 41 will be
accessed (see page C-16, Instances).
•
An Attribute Number of “9” indicates the Parameter Value
Attribute will be written (see page C-17, Instance Attributes).
Figure 6.11 – CIO Get Attribute Single Screen
N14:0 0 Value = 0.0Hz