Owner manual

PLC-5C Applications
6-15
Response Data
A Set Attributes Scattered message is used to write multiple
parameters that may or may not be in sequential order (figure 6.10).
•
A Service Code of “4C” indicates the Set_Attributes_Scattered
service (see page C-19, Object Specific Services).
N14:0 12 Parameter Number = 12
N14:1 3333 Value = 333.3VDC
N14:2 0 (Pad Word)
N14:3 11 Parameter Number = 11
N14:4 0 Value = 0.0Hz
N14:5 0 (Pad Word)
N14:6 10 Parameter Number = 10
N14:7 148 Value = 14.8Hrs
N14:8
N14:9 9 Parameter Number = 9
N14:10 23 Value = 2.3MWh
N14:11
Figure 6.10 – CIO Set Attributes Scattered Screen