Owner manual

Installing the ControlNet Module
3-3
Step 4. For 1-20 HP SP600 drives, fold the Internal Interface
cable behind the module and mount the module on the
drive using the four captive screws. See figure 3.3.
For 25-40 HP SP600 drives, mount the module on the
drive using the four captive screws to secure and ground
it to the drive.
➊
DPI Connector
➋
15.24 cm (6 in) Internal Interface cable
➌
2.54 cm (1 in) Internal Interface cable
Figure 3.2 – DPI Ports and Internal Interface Cables
➊
➋
➌
ControlNet Module
SP600 Drive
1-20 HP @ 460 V
SP600 Drive
25-40 HP @ 460 V