Owner manual

B-6
ControlNet Communications Module
Configures the I/O that is transferred through the module.
I/O that the module is actively transmitting. The value of this
parameter will usually be equal to the value of DPI I/O Cfg (13).
13 DPI I/O Cfg
Range:
See figure B.1.
Default:
xxx0 0001
Type:
Read/Write
Reset Required:
Ye s
Figure B.1 – DPI I/O Config (13)
00010xxx
01234567
1= I/O Enabled
0= I/O Disabled
x=Not Used
Cmd/Ref
Datalink A
Datalink B
Datalink C
Datalink D
Not Used
Not Used
Not Used
14 DPI I/O Active
Range:
See figure B.2.
Default:
xxx0 0001
Type:
Read Only
Reset Required:
N/A
Figure B.2 – DPI I/O Active (14)
00010xxx
01234567
1= I/O Enabled
0= I/O Disabled
x=Not Used
Cmd/Ref
Datalink A
Datalink B
Datalink C
Datalink D
Not Used
Not Used
Not Used