User guide

RS485 DF1 Module Parameters B-1
APPENDIX B
RS485 DF1 Module
Parameters
The following information is provided for each module parameter
along with its description:
About Parameter Numbers
The parameters in the RS485 DF1 module are numbered
sequentially. However, depending on the configuration tool used,
they may have different numbers.
Parameter Number: Unique number assigned to each
parameter.
Parameter Name: Unique name assigned to each
parameter.
Range: Predefined parameter limits or
selections.
Default: Factory default setting.
Type: Read Only or Read/Write.
Reset Required: Module must be reset before parameter
value is recognized.
Configuration Tool Numbering Schemes
• VS Utilities
•OIM
The module parameters begin with
parameter 1. For example, parameter 01
(DPI Port) is parameter 1 as indicated by
the manual.