Instruction Manual

Serial Converter Parameters B-1
APPENDIX B
Serial Converter Parameters
This chapter presents information about the parameters in the serial
converter.
Port on the host product to which the serial converter is connected.
DF1 node address for the serial converter. This is a decimal value.
Serial port rate for the DF1 serial port on the serial converter.
01 DPI Port
Range: 0 to 7
Default: 0
Type: Read Only
02 DF Addr Cfg
Range: 0 to 254
Default: 1
Type: Read/Write
Reset Required: Ye s
03 DF Rate Config
Range: 0 = 9600
1 = 19.2K
2 = 38.4K
Default: 0
Type: Read/Write
Reset Required: Ye s