User guide

RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions 31
Publication RDB-IN002B-EN-P — February 2010
Specifications
Connector Information
Connector information includes the manufacturer part numbers for connector
shells, and contacts for power, ground, and feedback pins.
All connectors are Intercontec SpeedTec type, and include an O-ring installed on
outer diameter of cable mounting area.
Attribute Value
Ambient temperature, operating 0…40 °C (32…104 °F)
(2)
(2) To obtain this thermal rating, mount RDB-x290 motors on a surface with heat dissipation equivalent to a
406.4 x 406.4 x 19.05 mm (16 x 16 x 0.75 in.) aluminum heatsink, or RDB-x410 motors on a surface with heat dissipation
equivalent to a 508 x 508 x 19.05 mm (20 x 20 x 0.75 in.) aluminum heatsink.
Ambient temperature, storage -30…70 °C (-22…158 °F)
Relative humidity, storage 5…95% noncondensing
Atmosphere, storage Non-corrosive
IP rating
(1)
(1) The motor rating excludes any reduction in the rating resulting from cables, plugs, or connections with a lower rating, and
an unsealed customer machine mounting interface.
IP65 - dust tight, water jet
(3)
(3) International Protection Code (IP65) is roughly equivalent to a NEMA 12 (industrial use dust tight, drip tight).
Connector Mount Type
Connector Shell
(1)
(1) Connector shell does not include power, ground, or feedback contacts.
Power and Ground
Contacts
Feedback
Contacts
Feedback, M23 90 degree
swivel mount
AEDC113NN00000200000 N/A 61.004.11
Power, M23 straight
base mount
BEGA144NN00000201000 61.193.11 N/A
Power, M40 CEGA271NN00000051000 61.202.11 N/A